Shotgun Targets

Shooting Targets USA manufactures its 1/2” gong targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between, this 1/2” gong target will help you hone your skills.

• 1/2” thick
• ½” mounting holes
• Available in 2”, 3”, 4”, 6”, 8”, 10”, 12” and 16"
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

Shooting Targets USA manufactures its ⅜” gong targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between, this ⅜” gong target will help you hone your skills.

• ⅜” thick
• ½” mounting holes
• Available in 2”, 3”, 4”, 6”, 8”, 10”, 12” and 16” sizes
• Unpainted
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

Shooting Targets USA manufactures its ¼” gong targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our water jet targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

Designed for centerfire handguns up to 45 ACP, these targets ring loud and clear when hit. 

• ¼” thick
• ½” mounting holes
• Available in 2”, 3”, 4”, 6”, 8”, 10”, 12” and 16” sizes
• Unpainted
• Brinell hardness (BHN) of 477-534
• Weight - 0.35 lbs. - 15 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for pistols that include: Pellet, 22 LR, 380, 9mm, 357 Mag, 40, and 45 ACP. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, and 22-250. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our ½” AR500 bullseye gongs out of USA steel.  

Our target provides visual and audio confirmation of feedback. The center bullseye not only adds an extra challenge but sounds different when hit so you know you’ve gotten a bullseye.

• ½” x 10” steel target with a ½” x 4” gong plate behind the 3” center bullseye
• ½” mounting holes
• Shipped fully assembled and ready to hang with chains
• Brinell hardness (BHN) of 485
• Weight - 18 lbs.
• We offer a risk free return policy for unshot targets

You can use our ½” bullseye gong targets for all calibers up to .338 magnum rifles with an impact velocity of 3000 f.p.s. or less. We recommend a minimum distance of 100 yards for magnum rifles. Or use these targets for practice with a .50 Browning Machine Gun at about 400 yards or more. 

• Patent Pending Design Base
• Minimum shooting distance = 10 yards
• Includes (6) 6" round 3/8" thick AR500 paddles
• Smooth and reliable paddle rotation (paddles flip left and right when shot)
• Commercial grade design suitable for high volume use
• Target stands 5' tall and weighs 85 lbs.

Patent Pending Design

3/8' AR500 Steel Torso and Targets.

The Triple Threat Target can handle all handguns and most rifles. The Triple Threat target has 3 uniquely sized target zones to challenge you. A direct hit will swing the paddle out, another hit will swing it back. All Targets surfaces are waterjet cut from 3/8” thick Rifle rated AR500. The target seats onto the heavy duty target stand base. The edges face the shooter for minimal surface area to distract you from your target and is able to stand up to a beating from missed shots. 

• Finest 1/2" thick torso target genuine Water Jet cut USA AR500 steel
• 12" x 24" torso has 5" hole with 6" x 1/2" AR500 gong mounted behind it
• Ships fully assembled with chains ready to hang and shoot
• A customer favorite the center bullseye adds an extra challenge
• Center hits sound different and are easy to notice
• Mounting Holes: 1/2"

Patent Pending Design Base

Our Harmonic Human Target is the ultimate defensive handgun training target.  

The overall size of the front plate measures 12" wide by 28" tall. With the stand the target is the average human size (5' 10"). The outer & inner plates are laser cut from AR500 steel. The outer faceplate is 3/8” and the inner harmonic plate is 1/4”. The harmonic target includes integrated tuning forks that are concealed behind the front plate.  The inner, Harmonic Plate, is mounted using industrial grade die springs.  Bullets that strike the front plate produce a dull, low frequency ring.  Shots that pass through the openings in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement.

Other steel targets with hinged doors and windows are less suitable for defensive handgun training.  These designs condition the shooter to pause while the hinged door falls back into place.  Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots.

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our 3/8” AR500 bullseye gongs out of USA steel.  

Suitable for pistols and other firearms, our AR500 steel bullseye gongs provide challenging long range rifle targets, too. 

Our target provides visual and audio confirmation of feedback. The center bullseye not only adds an extra challenge but sounds different when hit so you know you’ve gotten a bullseye.

• 3/8” x 10” steel target with a 3/8” x 4” gong plate behind the 3” center bullseye
• ½” mounting holes
• Shipped fully assembled and ready to hang with chains
• Brinell hardness (BHN) of 488
• Weight - 15 lbs.
• We offer a risk free return policy for unshot targets

These targets offer a good challenge for competitive hand gunners or gun clubs with high shooting volumes. They handle magnum handguns and rifles with velocities up to 3000 f.p.s. with 3500 ft. lb. impact energy. We recommend a minimum distance from target to shooter of 10 yards for pistols and 100 yards for rifles. 

1/2" AR500 Steel is perfect for rifles up to 50BMG!

Same proven targets grouped together to save you money!

Chains and hanging equipment not included

Shooting Targets USA manufactures its animal targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between.

• 1/2”, 3/8", 1/4" thick
• ½” mounting holes
• 19" Long by 12" Tall
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

• Finest 1/2" thick torso target genuine Water Jet cut USA AR500 steel
• 12" x 24" Torso
• Perfect for simulating an attacker
• Large targets rings loudly when hit makes it fun to shoot
• Mounting Holes: 1/2"

Shooting Targets USA manufactures its animal targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between.

• 1/2”, 3/8", 1/4" thick
• ½” mounting holes
• 7.5" Long by 6.5" Tall
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

Shooting Targets USA manufactures its animal targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between.

• 1/2”, 3/8", 1/4" thick
• ½” mounting holes
• 24" Tall by 12" Wide
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our ½” AR500 bullseye gongs out of USA steel.  

Our target provides visual and audio confirmation of feedback. The center bullseye not only adds an extra challenge but sounds different when hit so you know you’ve gotten a bullseye.

• ½” x 16” steel target with a ½” x 6” gong plate behind the 5” center bullseye
• ½” mounting holes
• Shipped fully assembled and ready to hang with chains
• Brinell hardness (BHN) of 485
• Weight - 25 lbs.
• We offer a risk free return policy for unshot targets

You can use our ½” bullseye gong targets for all calibers up to .338 magnum rifles with an impact velocity of 3000 f.p.s. or less. We recommend a minimum distance of 100 yards for magnum rifles. Or use these targets for practice with a .50 Browning Machine Gun at about 400 yards or more. 

Shooting Targets USA manufactures its animal targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between.

• 1/2”, 3/8", 1/4" thick
• ½” mounting holes
• 12" Long by 4" Wide
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

• Finest 3/8" thick torso target genuine Water Jet cut USA AR500 steel
• 12" x 24" torso has 5" hole with 6" x 3/8" AR500 gong mounted behind it
• Ships fully assembled with chains ready to hang and shoot
• A customer favorite the center bullseye adds an extra challenge
• Center hits sound different and are easy to notice
• Mounting Holes: 1/2"

• Finest 3/8" thick torso target genuine Water Jet cut USA AR500 steel
• 12" x 24" Torso
• Perfect for simulating an attacker
• Large targets rings loudly when hit makes it fun to shoot
• Mounting Holes: 1/2"

Shooting Targets USA manufactures its animal targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between.

• 1/2”, 3/8", 1/4" thick
• ½” mounting holes
• 17" Long by 24" Tall
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

COMES IN FDE TOP GONG AND SNIPER GREY BOTTOM GONG COLORS

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our 3/8” AR500 Targets out of USA steel.  

Suitable for pistols and other firearms, our AR500 steel Targets provide challenging long range rifle targets, too. 

Our targets provide visual and audio confirmation of feedback.

• 3/8” x 8” steel target with a 3/8” x 6” swinging gong below
• Shipped fully assembled and ready to hang
• Brinell hardness (BHN) of 500+
• Weight - 10 lbs.
• We offer a risk free return policy for unshot targets

These targets offer a good challenge for competitive hand gunners or gun clubs with high shooting volumes. They handle magnum handguns and rifles with velocities up to 3000 f.p.s. with 3500 ft. lb. impact energy. We recommend a minimum distance from target to shooter of 10 yards for pistols and 100 yards for rifles. 

3/8" AR500 Steel is perfect for for rifles up to ,308

Same proven targets grouped together to save you money!

Chains and hanging equipment not included

COMES IN NEW COLORS FDE FRONT AND SNIPER GREY BACK PLATE

Patent Pending Stand Design

Our new IPSC Harmonic Target is the ultimate training target.

The overall size of the steel matches a standard IPSC / USPSA metric target with the "D" zone removed.  The outer and inner plates are laser cut from AR500 steel and is mounted on our custom stand. The faceplate is 3/8” and the inner harmonic is 1/4” thick. Our harmonic targets include integrated tuning forks that are concealed behind the front plate.  The inner, Harmonic Plate, is mounted using industrial grade die springs.  Bullets that strike the outer "B" and "C" zones produce a dull, low frequency ring.  Shots that pass through the "A" zone windows in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement.

Other steel targets with hinged doors and windows are less suitable for competition and defensive handgun training.  These designs condition the shooter to pause while the hinged door falls back into place.  Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots.

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our ¼” AR500 bullseye gongs out of USA steel.  

Suitable for pistols and other firearms, our AR500 steel bullseye gongs provide challenging long range rifle targets, too.

Our target provides visual and audio confirmation of feedback. The center bullseye not only adds an extra challenge but sounds different when hit so you know you’ve gotten a bullseye.

• ¼” x 6” steel target with a 1/4” x 2” gong plate behind the 1” center bullseye
• ½” mounting holes
• Shipped fully assembled and ready to hang with chains
• Brinell hardness (BHN) of 482
• Weight - 5 lbs.
• We offer a risk free return policy for unshot targets

Our ¼” bullseye gong targets are rated for rimfire and pistol calibers up to .45 ACP at 3000 f.p.s. Stand at least 10 yards away for safety.

• Durable Carboard
• Brown Front & Back
• Official IDPA Target Certified

• Finest 1/4" thick torso target genuine Water Jet cut USA AR500 steel
• 12" x 24" torso has 5" hole with 6" x 1/4" AR500 gong mounted behind it
• Ships fully assembled with chains ready to hang and shoot
• A customer favorite the center bullseye adds an extra challenge
• Center hits sound different and are easy to notice
• Mounting Holes: 1/2"

COMES IN NEW COLORS FDE FRONT AND SNIPER GREY BACK PLATE

Patent Pending Design Base

Our new IDPA Harmonic Target is the ultimate handgun training target.

The overall size of the steel matches a standard IDPA target with the "-3" zone removed.  The outer and inner plates are laser cut from AR500 steel and is mounted on our custom stand. The faceplate is 3/8” thick and the inner harmonic is 1/4” thick. Our harmonic targets include integrated tuning forks that are concealed behind the front plate.  The inner, Harmonic Plate, is mounted using industrial grade die springs.  Bullets that strike the outer "-3" zones produce a dull, low frequency ring.  Shots that pass through the "-0" zone windows in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement.

Other steel targets with hinged doors and windows are less suitable for competition and defensive handgun training.  These designs condition the shooter to pause while the hinged door falls back into place.  Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots. 

• Speed Rack with swinger comes with a set of Quick Stands, (6) 8" AR500 Gong Targets on top and (6) 6" AR500 Gong Targets on the bottom.
• Speed Rack WITHOUT swinger comes with a set of Quick Stands, (6) 8" AR500 Gong Targets ONLY.
• Made 100% in the USA with USA materials
• Rated for rifles and handguns
• Maximum velocity = 3,000 fps at the target / Maximum Energy 2,300 ft/lbs at the target
• Minimum shooting distance is 10 yards for pistols & 100 Yards for rifles
• Target plate is reversible for extended life
  
• Plates are mounted at 15 degree angle 
• 2x4 wood beam & legs are NOT included
• Quick setup and easy DIY target system

Our new Speed Rack is a great solution for shooters who want a full-size plate rack on a budget. The quick slide on target hangers allow this target to be easily transported and set-up without tools. 

• ASSEMBLY: Takes 1, 1/2" bolt (You will need a 5/8" wrench)
• Only Texas Star to ONLY  require 1 bolt and 10 minutes to assemble 
• Rated for handguns, rifles and shotguns (buckshot)
• Minimum shooting distance (handguns = 10 yards / rifles = 100 yards)
• Includes (5) 8" diameter x 3/8" thick AR500 plates
• Includes (5) AR500 x 3/8" thick arms
• Spring retention system makes resetting the target quick and easy
• Commercial grade design suitable for high volume use
• Target stands over 6' tall when fully assembled
• Heavy gauge cover protects pillow bearings from falling plates
• Shaft is Stainless Steel for weather resistance
• Includes (2) industrial grade, maintenance free, sealed pillow bearings
• 48" diameter hub assembly fits in most truck beds and installs with a single bolt

Description

Our Texas Star Target is one of our most challenging target designs.  The 8" plates are held in place with a unique spring retention system.  When shot, the plates are released from the retention pocket and fall to the ground.  The change in weight distribution causes the hub and 8" plates to rotate.  The stainless steel shaft and duel pillow bearings maximize the speed and change of direction with each successful shot on the plates.

Resetting the target is quick and simple.  Just lift the spring and insert the stem of the plate into the pocket.  One person can reset all five plates in about 20 seconds. 

Shooting Targets USA Texas Star Target is the best Texas Star on the market due to the fact it only needs one bolt and sets up in 10 minutes.  The Texas Star is commonly used in 3-Gun and USPSA matches.  The Texas Star target also has a place in tactical and law enforcement programs as training on moving targets has become mandatory for many law enforcement agencies across the country.

Specifications

Overall Height: 6' 2" Tall
Plates: 8" diameter x 3/8" thick AR500 steel
Vertical Arm: Impact zones are 3/8" AR500, 1/4" thick A36 Sides.
Texas Star Arms: 3/8" thick AR500 steel
Total Product Weight: 142 lbs 
  1) Stand, Angle Iron Post, Bearing Housing = 54 lbs.
  2) Hub Assembly = 58 lbs.
  3) Plates = 28 lbs.

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our ¼” AR500 bullseye gongs out of USA steel.  

Suitable for pistols and other firearms, our AR500 steel bullseye gongs provide challenging long range rifle targets, too.

Our target provides visual and audio confirmation of feedback. The center bullseye not only adds an extra challenge but sounds different when hit so you know you’ve gotten a bullseye.

• ¼” x 10” steel target with a 1/4” x 4” gong plate behind the 3” center bullseye
• ½” mounting holes
• Shipped fully assembled and ready to hang with chains
• Brinell hardness (BHN) of 482
• Weight - 10 lbs.
• We offer a risk free return policy for unshot targets

Our ¼” bullseye gong targets are rated for rimfire and pistol calibers up to .45 ACP at 3000 f.p.s. Stand at least 10 yards away for safety.

1/4" AR500 Steel is perfect for all handguns except 44 Mag

Same proven targets grouped together to save you money!

Chains and hanging equipment not included

STAND NOT INCLUDED!!

Goes with heavy duty target stand base

3/8' AR500 Steel Torso and Targets.

The Triple Threat Target can handle all handguns and most rifles. The Triple Threat target has 3 uniquely sized target zones to challenge you. A direct hit will swing the paddle out, another hit will swing it back. All Targets surfaces are waterjet cut from 3/8” thick Rifle rated AR500. The target seats onto the heavy duty target stand base. The edges face the shooter for minimal surface area to distract you from your target and is able to stand up to a beating from missed shots. 

Shooting Targets USA manufactures its animal targets from AR500 steel made in the USA. We use a robust QA process to ensure that each of our waterjet cut targets exceeds quality standards and sandblast the entire plate to remove mill scale before cutting.

You’ll never wonder if you missed the target because it gives a loud, clear ring when hit. From rimfire to 30 - 06 and calibers in between.

• 1/2”, 3/8", 1/4" thick
• ½” mounting holes
• 24" Long by 12" Tall
• Brinell hardness (BHN) of 477-534
• Weight - 0.5 lbs. - 20.6 lbs.
• We offer a risk free return policy for unshot targets

These targets work great for the following pistol calibers: pellet, 22 LR, 380, 9mm, 357 Mag, 40, 45 ACP, 500 S&W. You can use these targets for rifles including: pellet, 22 LR, 17 HMR, 22-250, 223/ 5.56, 7.62, 243, 260, and 30-06. If you’ve got a shotgun that shoots 410 or 20G slugs, this target is perfect.

Shooters and bystanders should remain a minimum of 200 yards away for velocities over 3000 f.p.s. We recommend standing no closer than 10 yards for handguns and 100 yards for rifles.

Shooting Targets USA takes great pride in the shooting products we make. Our rigorous QA process ensures the highest standard of quality. We use a waterjet to cut our 3/8” AR500 Targets out of USA steel.  

Suitable for pistols and other firearms, our AR500 steel Targets provide challenging long range rifle targets, too. 

Our target provides visual and audio confirmation of feedback. 

• 3/8” x 6” steel target 
• Shipped fully assembled and ready to hang
• Brinell hardness (BHN) of 500+
• Weight, 5 lbs.
• We offer a risk free return policy for unshot targets

These targets offer a good challenge for competitive hand gunners or gun clubs with high shooting volumes. They handle magnum handguns and rifles with velocities up to 3000 f.p.s. with 3500 ft. lb. impact energy. We recommend a minimum distance from target to shooter of 10 yards for pistols and 100 yards for rifles. 

NEW COLORS OD GREEN STAND WITH FDE PADDLES

• ASSEMBLY: Takes 1, 1/2" bolt (You will need a 5/8" wrench)
• Only Texas Star to ONLY  require 1 bolt and 10 minutes to assemble 
• Rated for handguns, rifles and shotguns (buckshot)
• Minimum shooting distance (handguns = 10 yards / rifles = 100 yards)
• Includes (10) 8" diameter x 3/8" thick AR500 plates
• Includes (10) AR500 x 3/8" thick arms
• Spring retention system makes resetting the target quick and easy
• Commercial grade design suitable for high volume use
• Target stands over 6' tall when fully assembled
• Heavy gauge cover protects pillow bearings from falling plates
• Shaft is Stainless Steel for weather resistance
• Includes (2) industrial grade, maintenance free, sealed pillow bearings
• 48" diameter hub assembly fits in most truck beds and installs with a single bolt

Description

Our Texas Star Target is one of our most challenging target designs.  The 8" plates are held in place with a unique spring retention system.  When shot, the plates are released from the retention pocket and fall to the ground.  The change in weight distribution causes the hub and 8" plates to rotate.  The stainless steel shaft and duel pillow bearings maximize the speed and change of direction with each successful shot on the plates.

Resetting the target is quick and simple.  Just lift the spring and insert the stem of the plate into the pocket.  One person can reset all five plates in about 20 seconds. 

Shooting Targets USA Texas Star Target is the best Texas Star on the market due to the fact it only needs one bolt and sets up in 10 minutes.  The Texas Star is commonly used in 3-Gun and USPSA matches.  The Texas Star target also has a place in tactical and law enforcement programs as training on moving targets has become mandatory for many law enforcement agencies across the country.

Specifications

Overall Height: 6' 2" Tall
Plates: 8" diameter x 3/8" thick AR500 steel
Vertical Arm: Impact zones are 3/8" AR500, 1/4" thick A36 Sides.
Texas Star Arms: 3/8" thick AR500 steel
Total Product Weight: 142 lbs 
  1) Stand, Angle Iron Post, Bearing Housing = 54 lbs.
  2) Hub Assembly = 58 lbs.
  3) Plates = 28 lbs.

STAND NOT INCLUDED

Our Harmonic Human Target is the ultimate defensive handgun training target.  

The overall size of the front plate measures 12" wide by 28" tall.  The outer & inner plates are laser cut from 3/8" thick AR500 steel. The harmonic target includes integrated tuning forks that are concealed behind the front plate.  The inner, Harmonic Plate, is mounted using industrial grade die springs.  Bullets that strike the front plate produce a dull, low frequency ring.  Shots that pass through the openings in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement.

Other steel targets with hinged doors and windows are less suitable for defensive handgun training.  These designs condition the shooter to pause while the hinged door falls back into place.  Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots.

Our new Stake & Shoot targets are safe, durable, and EXTREMELY EASY to use. 

Just stomp them in the ground and start shooting! 

Each successful hit produces a loud ring and visual reaction. These rifle targets are perfect for recreational shooting, competition and training. 

• Rated for all handguns and rifles with muzzle velocities under 3,100 fps
• Built to withstand all standard FMJ ammunition 
• Minimum distance: Pistols = 10 yards  |  Rifles = 100 yards
• 3/8" thick AR500 target plate measures
• Industrial grade compression springs produce maximum visual and audio feedback
• Spring mechanism is fully protected behind hardened steel target face
• Target plates are reversible for extended life

• Patent Pending Design Base
• Minimum shooting distance = 10 yards
• Includes (6) 6" round 1/4" thick AR500 paddles
• Smooth and reliable paddle rotation (paddles flip left and right when shot)
• Commercial grade design suitable for high volume use
• Target stands 5' tall and weighs 85 lbs.

COMES IN NEW COLORS FDE FRONT AND SNIPER GREY BACK PLATE

STAND NOT INCLUDED

Our new IDPA Harmonic Target is the ultimate handgun training target.

The overall size of the steel matches a standard IDPA target with the "-3" zone removed.  The faceplate and inner plates are laser cut AR500 steel and is mounted on our custom stand. The faceplate is 3/8” and the harmonic inner target is 1/4” AR500. Our harmonic targets include integrated tuning forks that are concealed behind the front plate.  The inner, Harmonic Plate, is mounted using industrial grade die springs.  Bullets that strike the outer "-3" zones produce a dull, low frequency ring.  Shots that pass through the "-0" zone windows in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement.

Other steel targets with hinged doors and windows are less suitable for competition and defensive handgun training.  These designs condition the shooter to pause while the hinged door falls back into place.  Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots. 

Our new Stake & Shoot targets are safe, durable, and EXTREMELY EASY to use. 

Just stomp them in the ground and start shooting! 

Each successful hit produces a loud ring and visual reaction. These rifle targets are perfect for recreational shooting, competition and training. 

• Rated for all handguns and rifles with muzzle velocities under 3,100 fps
• Built to withstand all standard FMJ ammunition 
• Minimum distance: Pistols = 10 yards  |  Rifles = 100 yards
• 3/8" thick AR500 target plate measures
• Industrial grade compression springs produce maximum visual and audio feedback
• Spring mechanism is fully protected behind hardened steel target face
• Target plates are reversible for extended life

Our new Stake & Shoot targets are safe, durable, and EXTREMELY EASY to use. 

Just stomp them in the ground and start shooting! 

Each successful hit produces a loud ring and visual reaction. These rifle targets are perfect for recreational shooting, competition and training. 

• Rated for all handguns and rifles with muzzle velocities under 3,100 fps
• Built to withstand all standard FMJ ammunition 
• Minimum distance: Pistols = 10 yards  |  Rifles = 100 yards
• 3/8" thick AR500 target plate
• Industrial grade compression springs produce maximum visual and audio feedback
• Spring mechanism is fully protected behind hardened steel target face
• Target plates are reversible for extended life

• Contact us for mix request, Mix and match any animal we offer!
• Shoot any caliber at these targets!
  
• Fun animal cardboard targets, shoot close or far away
• Use these animals to prepare for your next hunt
• 3/16" Cardboard
• Pack of 10 of any animal or a pack of 10 with a mix of animals

COMES IN NEW COLORS FDE FRONT AND SNIPER GREY BACK PLATE

STAND NOT INCLUDED

Our new IPSC Harmonic Target is the ultimate handgun training target.

The overall size of the steel matches a standard IPSC / USPSA metric target with the "D" zone removed.  The outer and inner plates are laser cut from AR500 steel and is mounted on our custom stand. The faceplate is 3/8” and the harmonic inner is 1/4” thick. Our harmonic targets include integrated tuning forks that are concealed behind the front plate.  The inner, Harmonic Plate, is mounted using industrial grade die springs.  Bullets that strike the outer "B" and "C" zones produce a dull, low frequency ring.  Shots that pass through the "A" zone windows in the front plate, strike the Harmonic Plate and produce a loud, high frequency ring allowing the shooter to instantly identify their shot placement.

Other steel targets with hinged doors and windows are less suitable for competition and defensive handgun training.  These designs condition the shooter to pause while the hinged door falls back into place.  Our Harmonic Plate is mounted in a fixed position so it's always ready for rapid follow-up shots.

Our new Stake & Shoot targets are safe, durable, and EXTREMELY EASY to use. 

Just stomp them in the ground and start shooting! 

Each successful hit produces a loud ring and visual reaction. These rifle targets are perfect for recreational shooting, competition and training. 

• Rated for all handguns and rifles with muzzle velocities under 3,100 fps
• Built to withstand all standard FMJ ammunition 
• Minimum distance: Pistols = 10 yards  |  Rifles = 100 yards
• 3/8" thick AR500 target plate measures
• Industrial grade compression springs produce maximum visual and audio feedback
• Spring mechanism is fully protected behind hardened steel target face
• Target plates are reversible for extended life

Our new Stake & Shoot targets are safe, durable, and EXTREMELY EASY to use. 

Just stomp them in the ground and start shooting! 

Each successful hit produces a loud ring and visual reaction. These rifle targets are perfect for recreational shooting, competition and training. 

• Rated for all handguns and rifles with muzzle velocities under 3,100 fps
• Built to withstand all standard FMJ ammunition 
• Minimum distance: Pistols = 10 yards  |  Rifles = 100 yards
• 3/8" thick AR500 target plate measures
• Industrial grade compression springs produce maximum visual and audio feedback
• Spring mechanism is fully protected behind hardened steel target face
• Target plates are reversible for extended life

Our new Stake & Shoot targets are safe, durable, and EXTREMELY EASY to use. 

Just stomp them in the ground and start shooting! 

Each successful hit produces a loud ring and visual reaction. These rifle targets are perfect for recreational shooting, competition and training. 

• Rated for all handguns and rifles with muzzle velocities under 3,100 fps
• Built to withstand all standard FMJ ammunition 
• Minimum distance: Pistols = 10 yards  |  Rifles = 100 yards
• 3/8" thick AR500 target plate measures
• Industrial grade compression springs produce maximum visual and audio feedback
• Spring mechanism is fully protected behind hardened steel target face
• Target plates are reversible for extended life